GRC products made of reinforced with glass fiber grid cloth woven base material, the alkali resistant polymer emulsion is handled and become, the product high strength, good alkali resistance, can be persistent resistance to alkali stale and pedantic scholar, is the cement concrete products, GRC wall panels, GRC components an ideal reinforcing material.
General specification:
1 mesh size: 8 mm x 8 mm to 10 mm x 10 mm to 12 mm x 12 mm
2 width: 60 cm, 90 cm 1 meter
3 per square gram weight: 125 g
Each roll length: 100 meters or 50 meters
5 colors;White (standard) yellow green or other colors.
Package: according to customer requirements packaging.
7 special specifications and hardness can be made according to the customer requirement book.
Glass fiber adhesive tape
Purpose: to repair the dry wall, plasterboard juncture, all kinds of wall cracks and other metope damaged
Main performance: good alkali resistance, durability, high tensile strength and deformation resistance, anti crack: not bad, not bubble: good self-adhesive,
Don't need to advance on the coat, the use of quick and easy construction.
Specification: 8 x 8.9 x 9 orders/inch: 55-85 g/m2.
000 mm width: 25-1: length: 10-153 meters.
Color: usually in white.
Method:
1. The wall clean and dry.
2. The sticky tape and cracks in the pressure.
3. Confirm the gap has been cover tape, and then more tape measure with a knife cut, the last brush on mortar.
4. Allow it to dry naturally, then gently.
5. Fill enough paint, make its surface smooth.
6. Remove leak adhesive tape.Then, look at all the cracks are properly patched, around the seams with subtle composite modification, so that it is bright and clean like new.

Exterior wall insulation technology in current national standards (JG149-2003) : to alkali resistant fiberglass mesh warp and weft tensile breaking strength shall not less than 750 n / 50 mm, alkali resistant tensile breaking strength retention rate shall not be less than 50%, the weight of every square metre 130 grams or more.And JG158-2004 to alkali resistant fiberglass mesh warp and weft tensile fracture strength less than 1250 n / 50 mm, alkali resistant tensile breaking strength retention rate shall not be less than 90%, the weight of every square metre 160 grams or more.
Common specifications:
- 4 x 4 mm, 165 g/m2, 1 m x 50 m
- 5 x5mm, 80 g/m2, 120 g/m2, 145 g/m2,
- 250 - g/m2, 280 g/m2, 300 g/m2, 1 mx50m
- 4 x 5 mm, 135 g/m2, 145 g/m2, 1 m x 100 m
7 x 7 mm, 140 g/m2