1.Introduction to the
Widely used in thermal insulation on the insulation of the building.Anti-aging, temperature shock resistance and corrosion resistance,

cold heat;High bearing capacity, high pressure, good tensile performance;After loading is not easy to deformation, moisture, vibration,

absorb noise and good insulation characteristics, easy to install.Heat preservation nail is insulation board fixed on the wall of a kind of

special engineering plastic bolts.Heat preservation nail consists of three parts: one is made of nylon sleeve;Second, the casing of

galvanized steel screws;Three is the nylon disc before casing (to gland insulation board).Its length varies according to the thickness of insulation

2.The performance parameters      
On the basis of exterior insulation standard JG149-2003;A single heat preservation nail by residual acuity 0.3 KN
Anchor pipe diameter of 0.7 to 0.8
The thermal conductivity of 0.06
The anchoring nails outside dish;50 mm
Use the temperature - 40 °, 70 °

3. Composition and usage

 Of exterior wall thermal insulation for heat preservation nail is the anchor pieces, by galvanized screws, nylon tube rises and the fixed wafers.

Depending on the insulation layer thickness, cent is a variety of specifications.Widely used in architectural decoration.The factory production

of thermal insulation nails is widely used in the insulation of the building.Anti-aging, temperature shock resistance and corrosion resistance,

cold heat;High bearing capacity, high pressure, good tensile performance;After loading is not easy to deformation, moisture, low vibration,

noise absorption and sound insulation, etc.Easy installation, hammer, don't need special installation tool.Galvanized screw well solve the

corrosion problems, good durability, and low heat transfer performance of nylon material, the winter is not cold bridge, high efficiency and energy saving.

4.specifications      

5.pitcure

6.Campany  introduct

Anping Dade wire mesh Co.,Ltd is a special manufacturer as well as a global supplier of wire

 mesh products, with its head office located in anping wire mesh industry zone,Hebei of China.

Dade wire mesh enjoying rich experience in wire mesh product and service,we can supply

 first class fiberglass mesh, heat preservation nail and angle bead ect.\

Dade wire mesh always paid great attention to R&D.Started since 1st Jan,2000,Dade has

constantly developed the market, updated its equipment, innovated on production technology

and improved its quality control system with one purpose only and that is to provide satisfactory

services for customers. Our aim is to make choice wire mesh products at the most possible economic cost for the market.

Looking  forward  you  letter!

Registered mail telephone: 15930820238
 Company email: dadewiremesh@hotmail.com
company website: http://www.dadewy.com
Skype:dadewiremesh@hotmail.com

 The main products: heat preservation nail fiberglass mesh bead corner Angle bead
Knitted wire

We have the best quality and most considerate service, please choose us